Parasound Halo Integrated Stereo Amplifier

Loading reviews...
Sold out
  • Parasound Halo Integrated Stereo Amplifier - Jamsticks

Parasound Halo Integrated Stereo Amplifier

Loading reviews...
Sold out
Whatsapp
Add to Wishlist

Brand Warranty as Applicable, Usually delivered in 2-8 Business days

  • Parasound Halo Integrated Stereo Amplifier

    Product Description

    Descriptions:

    Preamp and DAC Features

    • Latest generation ESS Sabre32 Reference DAC (ES9018K2M)
    • Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
    • USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
    • Windows USB drivers for ASIO & WASAPI
    • Mac OS does not require any drivers
    • Coax and optical accept PCM up to 192kHz/24-bit
    • Analog bass management with high & low pass crossovers
    • Home theater bypass input for surround sound integration
    • Front panel subwoofer level control
    • Dedicated high current headphone amplifier (TI TPA6120)
    • Phono for MM & MC with 100 Ω or 47k Ω load
    • Front panel Aux input with automatic +12 dB gain stage
    • 5 pairs RCA line level Analog inputs
    • 1 pair XLR balanced Analog input
    • Balanced XLR and RCA left and right preamp outputs
    • 1 balanced XLR and 2 RCA subwoofer outputs
    • Bass & treble controls with relay bypass from remote or front panel
    • Rear panel IR input and IR loop output jacks
    • 12 Volt input and output to triggers
    • Back-lit remote control with discrete buttons
    • 0.5w standby power consumption meets Energy Star & EU specs

    Power Amp Features

    • 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
    • 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
    • Power amp circuit topology designed by legendary John Curl
    • Direct amplifier input to bypass preamp section
    • High bias class A/AB operation
    • Oversized shielded toroid power transformer
    • Dual-mono power supply and power amplifier
    • 40,000uF power supply filter capacitance
    • Matched JFET input stages and MOSFET driver stages
    • 12 high voltage/high current bipolar output transistors
    • Heavy-duty 24k gold-plated 5-way speaker binding posts
    • Over temp and short circuit relay protection

    Specifications:

    Power Output - Both channels driven
    (0.05% THD, RMS, 20 Hz - 20 kHz)     		160 watts x 2 @ 8 Ω
    240 watts x 2 @ 4 Ω
    Preamp Stage Input Sensitivity
    300 mV in for 1 V at Pre Out jacks     		Total Preamp Stage Gain: 10 dB
    Max Output Unbalanced: 7 V
    Max Output Balanced: 9 V
    XLR Pin Identification 1 = Ground (Shield)
    2 = Positive
    3 = Negative (Return)
    Power Output - Both channels driven
    (0.9% THD, RMS, 20 Hz - 20 kHz)     		180 watts x 2 @ 8 Ω
    270 watts x 2 @ 4 Ω
    Power Amplifier Stage Sensitivity
    1 V at Bypass/Amp In for 28 V at Speaker Out    		 Total Amp Stage Gain: 28 dB
    Input Impedance Unbalanced: 24 k Ω
    Balanced: 100 k Ω per leg
    Current Capacity 45 amps peak per channel
    Phono Stage Sensitivity / Input Impedance MM: 35 dB / 47 k Ω
    MC: 52 dB / 47 k Ω or 100 Ω
    Output Impedance Unbalanced: 100 Ω
    Balanced: 470 Ω per leg
    Frequency Response 10 Hz - 100 kHz, +0/-3 dB
    High & Low Pass Crossover Slopes 12 dB per octave
    Dimensions Width: 17-1/4" (437 mm)
    Depth: 16-1/4" (413 mm)
    Depth, with cables 17-1/4" (437 mm)
    Height, with feet: 5-7/8" (150 mm)
    Height, without feet: 5-1/4" (133 mm), 3U
    Total Harmonic Distortion (THD) < 0.01 %, average listening levels
    < 0.05 %, 160 watts x 2 @ 8 Ω
    Supported DAC Sampling Rates USB: up to 384 kHz / 32-bit PCM
    DSD Native: DSD 64, DSD 128, DSD 256
    DSD over PCM (DoP) at 384 kHz
    Coax/Opt: up to 192 kHz / 24-bit PCM
    Net Weight 33 lb. (15 kg)
    Signal to Noise Ratio - IHF A-weighted Line in: - 103 dB (input shorted)
    Digital in: - 106 dB
    Digital to Analog Converter ESS Sabre32 Reference ES9018K2M
    384 kHz / 32-bit
    Shipping Weight 45 lb. (20.4 kg)
    Amplifier Damping Factor > 800 at 20 Hz
    USB 2.0 Controller VIA VT1731, 384 kHz / 32-bit
    Power Requirement Standby: 0.5 watts
    Idling power: 70 watts
    Maximum: 750 watts
    110-125 VAC 60 Hz or 220-250 VAC 50 Hz
    AC mains voltage is set on rear
    Headphone Amplifier Texas Instruments TPA6120A
    Output Impedance 10 ohms

    All eligible company warranty and service support is being provided on Parasound Halo Integrated Stereo Amplifier