SAE 2HP-D Power Amplifier

Loading reviews...
Sold out
  • SAE 2HP-D Power Amplifier - Jamsticks

SAE 2HP-D Power Amplifier

Loading reviews...
Sold out
Whatsapp
Add to Wishlist

Brand Warranty as Applicable, Usually delivered in 2-8 Business days

  • SAE 2HP-D Power Amplifier

    Product Description

    Power so prodigious that we can measure it in horsepower!

    The revolutionary SAE 2HP amplifier is capable of over 746 watts or 1 horsepower per fully differential ‚¬œpush / pull‚¬? channel @ 1kHz in it‚¬„s 5RU chassis (rack-mounted or free standing).

    The world-renowned engineers at SAE achieved an industry leading >128dB of signal to noise ratio for one simple reason‚¬¦at SAE we want you to hear your recordings‚¬¦not the amplifier.

    The fully balanced, Class A/B SAE 2HP amplifier masterpiece is designed, engineered, and manufactured in America.

    Specifications:

    Analog Audio Inputs One Balanced (XLR) jack per channel
    Input Impedance 47 kOhms. Balanced for each phase
    Input Sensitivity 2.82V RMS input for 600W into 8 ohms
    Gain 27.8 dB
    Polarity Balanced; Pin-2 = Positive, Pin-3 = Negative for Non-Inverting Output
    Speaker Outputs WBT Low-Mass Binding posts 4 per channel; One 4-Pole Speakon connector per channel
    Modes /Process Standby: Amplifier is ready to be turned on via front panel switch or remote trigger. Overcurrent, D.C., and/or thermal protection: Amplifier will cycle. Catastrophic D.C. or output stage failure: Amplifier will shut down.
    Power Output

    Per Channel, All Channels Driven 8 ohms 4 ohms 2 ohms

    20 Hz-20 kHz, < 0.01% THD 600 WRMS 1200 WRMS 1200 WRMS

    1 kHz, 0.01% THD, (Watts) 746 WRMS 1350 WRMS 1350 WRMS

    1 kHz, 0.01% THD, (HP) 1 HP 1 ¾ HP 1 ¾ HP

    1 kHz, 1% THD 860 WRMS 1400 WRMS 2000 WRMS

    CEA 2006 1 kHz Burst Power 1100 WRMS 2000 WRMS 3400 WRMS
    Distortion

    THD + N, 20 Hz‚¬?20 kHz 0.01% 0.01% 0.01%

    THD + N at 1 kHz

    At Rated Power 0.005% 0.006% 0.008%

    At 10W 0.0015% 0.003% 0.003%
    Intermodulation Distortion (SMPTE or Twin-tone) Less than 0.01%
    Frequency Response +0, -3dB, 5 Hz to 150 kHz, 8 Ω
    Damping factor >600 at 100 Hz;
    Signal to noise ratio 128 dB referenced to rated output (A-Weighted)
    Slew rate >60V per microsecond
    Crosstalk > 110 dB
    Power Requirements 117V AC; 230V; 50/60 Hz
    Power Consumption Less than 1W x 2 at Standby; 1800W maximum x 2
    Trigger Input 3-24 VDC; Steady State
    Dimensions (W x H x D) 19‚¬? x 8¾‚¬? x 20‚¬? add 1‚¬? for feet and 1½‚¬? for connectors; 483 mm x 222mm x 508 mm Add 25.4mm for feet and 38mm for connectors
    Weight 98.5 lbs.; 44.8 kG

    All eligible company warranty and service support is being provided on SAE 2HP-D Power Amplifier